This machined purpose build Hyde Motor Works 60mm Pulley is meant to get more boost out of your Eaton M62 Supercharger. It is a fixed pulley and good for achieving the maximum recommended safe boost for a stock engine and most of what the M62 Supercharger can support, while staying efficient and safe. This is a fixed pulley, so you won’t be able to use the clutch. It will also require a smaller belt.
Works with the Eaton M62 Supercharger for the Mercedes Benz with Part Numbers A1110900380, 1110900380, A1110960099KZ found in the following:
1998-03 Mercedes C Class C230 2.3L, I-4,
1998-04 Mercedes SLK230 Roadster 2.3L, I-4, M62 3rd
2002-04 Mercedes SLK32 AMG Roadster 3.2L V6
2000 Mercedes Benz C320 3.2L V6 All SLK
Includes the correct bearing
Good for built 6 or 4-cylinder BMW engines that use the Hyde Motor Works kits supporting the above listed Eaton M62 supercharger. On 6 Cylinder M50/M52/M54/S50/S52/S54 engines, the boost should be between 5-8 PSI. On the M44/M43/M42 or similar stock BMW 4-cylinder engines the boost will be higher at 12 PSI+.
If you are using this pulley on your supercharger, ensure you use new high quality OEM or upgraded bearings and seals on your supercharger to avoid bearing failure.
Please check our Product Finder for all parts available in our shop necessary for this setup.
For more information on our custom pulleys, please check the overview on Our Products page.
Opens in a new window